Field pipe welding/fitting tools

Do you need to inert your pipes? Are you looking for a simple solution to hold your soluble paper in position?

The AQUASOL adhesive tape is totally water soluble. It allows to maintain the soluble paper on the inner walls of a stainless steel or steel pipe. Roll size 5 cm x 92 m.

Sold in rolls. Order now and receive your material in 24 H in France and Europe.

Looking for a quick solution to create an inerting chamber in a pipe? Need an accessory that leaves no trace?

AQUASOL water soluble paper or rice paper for pipe fitters is used to create inerting chambers. Suitable for welding pipes (mainly stainless steel), it is widely used in the chemical, petrochemical, gas and district heating sectors.

Sold by the metre in 78 cm width.

Delivery in France within 24 hours by DHL.

The pipe stopper is used to temporarily prevent the flow of gas or liquid.

Quick and easy to install. The peripheral seal expands when tightened with the central screw. Steel body design for greater rigidity and durability.

Choose your plug model according to the internal diameter of the pipe.

Packaged individually.

Delivery in France within 5 days.

Inflatable balloons for 1 - 14 inch pipe inerting.

Huntingdon Fusion Technique HFT® is re-launching a revolutionary inerting system with a new design that allows you to increase the quality of your welds at low cost. This new simplified design has significantly reduced manufacturing costs without compromising the quality of materials used in the manufacture of inflatable inerting systems.

The PurgElite® consists of two inflatable bladders covered with a flame retardant fabric, connected by a flexible hose that can withstand high temperatures.

Sold individually (consisting of 2 connected balloons). Delivered without accessories.

Order now and receive your product within 48/72 H in France and Europe.

Pressure regulator compatible with PurgElite inerting tanks. required for system operation.

Prevents gas overpressure and risk of bursting of purge tanks.

Sold individually

12 mm F/F straight connector for PurgElite inerting tank essential for system operation.

It can also be completed with hose and a PurgeGate pressure regulator.

Designed specifically for thin gauge stainless steel welding, the Backside Support Adhesive bonds to the backside of the weld to support the first pass and the weld pool. This technique allows the argon gas emitted by the welding torch to remain around the weld pool, eliminating the need for backside inerting, while providing a consistent high quality bead profile. The aluminum tape is 75 mm wide. It has a 25 mm wide woven, heat resistant glass fiber tape in the center. The fiberglass tape is dense, weighing 1000 grams per square meter. The 80 amp tape is supplied in 25 meter rolls, and the 160 and 240 amp tape is 12.5 meters long.

The Argweld® PurgEye® 100 IP65 portable Weld Purge Monitor® measures from atmosphere (20.94%) to 100 ppm (0.01%) residual oxygen. It offers an instant, safe and accurate reading of residual oxygen.

Ideal for work on stainless steel, it allows to know when the inertness of the weld is good enough to weld. It allows to check that there is no loss of inertness during welding. The sensor has a lifetime of more than 18 months (an indicator will be displayed) and is replaceable by yourself, spare sensors are available.

This device has a calibration system that is activated by a button on the front panel.

Transparent PVC hose for any use with temperature between -15°+60°.

Suitable for the distribution of neutral gases such as Argon or Nitrogen.

Packed in 50 m coils. Price per meter with a minimum order of 10 m.

Flame retardant cotton plugs provide protection during welding. These safety balloons are used to retain flow, but are not intended to retain pressure.

Input : 1/4" Gas Female. Diameters range from 1 - 14" (always in stock) and bigger (ask for quotation)

Need more information ? Feel free to call us.

Delivery throughout Europe in 24h/48h with DHL Europe Express service.

This ready-to-use kit includes : Flexible unit 2 m with 1/4 "valve, one regulator and inflatable shutter ballon <Ø450 (18")

Select the right model according to the inner diameter of your pipeline.

Order NOW and get your product in 24/48 H with DHL Europe Express Service.

This inerting case effectively removes oxygen and harmful gases for high-quality welds on stainless steel and sensitive alloys. It ensures solid, defect-free, and aesthetically pleasing joints. Easy to use and essential for professional results.

Purge Flex is a dual seal purge system that operates in ranges from 25mm to 320mm. It passes easily through pipes and bends without bowing. The design of the system allows the disk to be held firmly, which reduces cleaning time and the consumption of inert gas. For example, an 8 inch hose will remove less than 0.01% oxygen in less than 2 minutes.

Aluminum tape adhesive roll.

Decreasing price from 6 rolls.

Delivery France and Europe in 24/48 hours.

The conical silicone plugs are designed to seal all types of tubes in counterbore or other applications from Ø4mm to 170mm. They can be used over a temperature range of -60 to 260°C, their hardness is 50° Shore.

Sold in bags of 10 for plugs from Ø6-10 mm to Ø27-34 mm. And in bags of 5 for plugs from Ø32-38mm to Ø46-55mm.

Available with or without central hole.

Color: Transparent or black.

Delivery France and Europe in 24/48 hours

Inerting kit case DN15-150 Ø21-175mm for tube ½ "" to 8"" DOUBLE LIP washers.
This case contains a stainless steel cable, a stainless steel diffuser, and rolls of tape.

INCLUDED: transport box (480 mm x 380 mm x 170 mm).

Free delivery everywhere in France!

On a roll of transparent flexible hose 6.3x11 - L25m

Price per meter — packaged in 25m lengths

Roll of transparent flexible hose 9 x 13 mm - L25m

Price per meter

Pipefitter's scribe tape. Perfect for prefabrication and piping work in the workshop or on site. Width: 12.7 cm, Length: 274 cm. Temperature resistant up to 287°C

Perfect for time saving and precision pipe marking work.

Available in other sizes and temperature characteristics.

Delivery in France and Europe in 24 H/48H by DHL Express

Scribing tapePerfect for prefabrication and piping work in the workshop or on site.

Width: 12.7 cm, Length: 274 cm. Temperature resistant up to 177°C.

This product will save you time and improve accuracy in pipe marking work.

Available in other dimensions and resistance characteristics (T°).

Delivery in France and Europe in 24 H/48 H by DHL Express

Perfect for prefabrication and piping work in the workshop or on site.

Dimensions (metric) : 10 x 152 cm

Buy now and get your Delivery in France and Europe within 24  /48 H

The magnetic tracing tape completes the range of tracing tapes. It provides assistance during installation and leaves your hands free during operations.
Delivery France and Europe in 24h / 48h

The Markal Stylmark metal ballpoint marker is ideal for marking on most surfaces.

Thanks to its aluminium tube containing a thick paint, the marker can be applied to rough, vertical and overhead surfaces and has excellent adhesion to oily and damp surfaces.

To minimise health risks, the marker does not contain xylene.

Delivery in France and Europe within 24 hours 48 hours.

The Markal ST.2100 marker complies with European nuclear industry standards. It can be used safely on stainless steel. It is mainly used by nuclear power plants.

The marker is delivered with a PMUC certificate required and controlled by EDF, which includes a batch number to ensure product traceability.

The aluminium tube contains a thick paint that allows application to vertical surfaces.

Delivery in France and Europe in 24 hours / 48 hours.

Optional accessory for all MSA magnet squares.

Weight: 0.2lb / Maximum pull force: 16lb

Sold by set of 3. 

Delivery in France within 24/48H

STRONG HAND TOOLS magnetic square.

Able to hold metal parts at 45 or 90 degrees.

Dimensions: 11.1 x 9.5 x 2.5cm / Weight: 0.7kg

Made of metal / Sold individually 

Delivery in France within 24/48H.

Replacement lens for magnetic mirror.

Delivery in France and Europe in 24/48 hours.

Articulated mirror with magnetic hooking, allowing to see the most inaccessible places.

Delivery in France and Europe in 24/48 hours

Mechanic's hat square screw in ground milled steel. Ideal for checking the flatness of the surface and tracing right angles.

Delivery France Europe in 24/48 hours.

Simple mechanic's square in ground milled steel, high quality, Ideal for checking the flatness of the surface and tracing right angles

Available in several sizes.

Delivery France and Europe in 24/48 hours.

This versatile tool can be used as a graduated level or, with its accessories, to align double-drilled flanges.

Inspection mirror, diameter 50 mm (2.5’’).

Delivery France and Europe in 24/48 hours

Plastic body. Length 170mm.

Delivery France and Europe in 24/48 hours.

Metal body with clip. Length 150mm.

Delivery France and Europe in 24h / 48h

Advantages of demagnetization:

- No deflection of the arc by residual magnetism in the component

- Prevention of melting defects due to deficient sidewall gripping

- Reduction of rework

- Cost-effective and high quality results

Kit: Degauss 600 demagnetizer, two 35 mm² load cables of 5 m each, one 35 mm² load cable of 20 m, RT DGS1 remote control and a 5 m connecting cable

Discover the classicgear polished chrome combination ratchet wrenches from EGA Master. They easily withstand the resistance values ​​of the most demanding quality standards.

With classicgear ratcheting combination wrenches, you have the possibility to tighten nuts more comfortably, even if access to the nut is difficult. And allows you a minimum working angle of 5º between the ratchet teeth, which guarantees maximum operability.

Delivery in France and Europe in 24h 48h.

A 50 micron aluminium foil, coated one side with a dispersion acrylic, pressure sensitive adhesive. The tape is backed with a strong, polyethylene coated release paper. 

Specification:

Test certificate available to show this foil tape meets the requirements of the following specifications:

• BS476 Part 6 and Part 7 Category 1
• Fire Class M1
• Class O  

Sold by the roll. 

Delivery in 24/48H.

Temporary supply difficulty on this product. Next arrival: September 2022.

Deluxe model of welder's tongs/MIG pliers. Equipped with a chain. 

Dimensions : 25.4 x 10.16 x 2.54cm / Weight : 363g 

Country of origin : United States

Delivery in France within 24H

Standard model of multi-purpose welder's tongs / MIG pliers from Strong Hand Tools. 

Weight : 0.4kg / Length : 215mm

Delivery in France within 24H.

Pipe pliers with large V-bearings 28cm made of metal.

Wrist of the pliers made of alloy steel

Dimension: 3x3x3mm

Delivery in France under 24H

Magnetic wedge/Angle magnet adjustable from 30° to 275° with two on/off switches, from the brand STRONG HAND. 

Dimensions: 197 x 197 x 95mm / Weight: 3.4kg

Traction force : 50kg

Delivery in France within 24H.

Locking C-Clamp with swivel pad from STRONG HAND. 

Overall length : 165mm / Throat depth : 45mm

Maximum clamping capacity : 50mm

Weight : 0.3kg

Delivery in France within 24H

Locking C-Clamp with swivel pad from STRONG HAND. 

Overall length : 460mm / Throat depth : 254mm

Maximum clamping capacity : 114mm

Weight : 1.4kg

Delivery in France within 24 to 48H.

STRONG HAND TOOLS magnetic square.

Able to hold metal parts at 45 or 90 degrees.

Dimensions: 11.1 x 9.5 x 2.5cm / Weight: 0.7kg

Made of metal / Sold individually 

Delivery in France within 24/48H.

Combined square.

Delivery France and Europe in 24/48 hours

STRONG HAND TOOLS magnetic square.

Able to hold metal parts at 30/60°, 45°, 90°.

Dimensions: 150 x 130 x 35mm / Weight: 1.4kg

Made of metal / Sold individually 

Delivery in France within 24/48H